1HP 3700GPH Submersible Sump Pump with Automatic Float Switch

1HP 3700GPH Submersible Sump Pump with Automatic Float Switch

Key features

• If you need the pump to work in a low water level environment (the water level does not exceed the pump), the float switch need to be locked on the pump
• The working principle of the water pump is that the float switch goes down vertically, the beads inside are stuck on the line under the float switch, and the water pump starts automatically
• Kindly Tip: When you start using the pump, it must be fully submerged in water at a slight angle and hold it underwater for 20 to 30 seconds to ensure all trapped air is thoroughly expelled before operation
• 1 HP High Power: Sump Pump uses 1 HP power, Max 3700 Gallon Per Hour rating tackles any draining job at a fraction of the time
• Multi Outlet Sizes: 3 different diameters outlets (1 inch,1-1/4 inch, 1-1/2 inch) to adapte for different size hoses as needed according to the flow rate. The bigger the flow is, the wider the outlet should be
• Keep Open Mode: When you put the float switch locked on the sump pump, the sump pump will keep working all the time. Once the pump can not pump any water, you should cut off the power immediately to prevent the coil from getting burned

Free shipping on orders $50+. 30-day hassle-free returns.