2Pcs Oil Pressure Switch Sensor for Hyundai for Kia

Key features

• Replaces part numbers: 94750-37000, 94750-37100
• Fit for Hyundai Accent 2012-2019, Azera 2006-2017, Elantra 2013-2020, Entourage 2007-2008, Genesis 2009-2016, Genesis Coupe 2010-2016.Santa Fe 2003-2020
• Fit for Hyundai Sonata 2006-2019, Tiburon 2003-2008, Tucson 2005-2020, Veloster 2012-2020, Veracruz2007-2012, Xg350 2004-2005
• Fit for Kia Amanti 2007-2009, Borrego 2009, Forte 2010-2019, Optima 2006-2019, Rio 2012-2019, Rondo 2007-2011, Sedona 2005-2018, Sorento 2007-2019, Soul 2010-2019, Sportage 2005-2019
• Please refer to the installation instructions in the product description below

Replaces part numbers: 94750-37000, 94750-37100Installation Steps1. Preparation: Park the vehicle on a level surface. Disconnect the negative battery cable to prevent electrical shorts.Access the Sensor: If necessary, raise the vehicle using a jack and support it with jack stands. Locate the sensor above the oil filter on the engine block.Disconnect Electrical Connector: Press the locking tab on the electrical connector and pull it straight out.Remove Old Sensor: Place a drain pan underneath. Use your socket and ratchet to unscrew the old sensor.2. Install New Sensor:Compare the new sensor to the old one to ensure they match.Apply a small amount of thread sealant if the new sensor doesn't have it pre-applied.Thread the new sensor in by hand first to avoid cross-threading, then tighten with the socket. Do not overtighten.Reconnect & Test: Plug the electrical connector back in until it clicks. Reconnect the battery, start the engine, and check for leaks or the oil warning light on the dashboard.

Free shipping on orders $50+. 30-day hassle-free returns.