3/4 HP Automatic Submersible Sump and Utility Pump, 3300 GPH

3/4 HP Automatic Submersible Sump and Utility Pump, 3300 GPH

Key features

• High-flow utility drainage: The 3/4 HP motor delivers up to 3,300 GPH for moving water from pools, ponds and flooded areas, with up to 29 ft maximum head. These are separate peak ratings; actual flow depends on vertical lift, discharge hose diameter and the hose route.
• Integrated automatic control: The built-in float switch responds to rising water. Automatic mode starts above approximately 4 in and stops near 2 in, helping manage water in sump basins and low areas where the operating water levels are suitable.
• Manual mode for lower remaining water: Switch to manual operation when the water is below the automatic start level or when you need to drain down to approximately 1/2 in. This mode provides direct control for supervised water removal; disconnect power before the pump runs dry.
• Corrosion-resistant housing and motor protection: The durable housing suits water-removal tasks, while built-in thermal overload protection stops the motor if it overheats. The motor can restart after cooling; this protection does not replace monitoring during manual use.
• Water removal with small debris: The bottom intake passes particles up to 1/5 in, adding flexibility for drainage where small debris is present. The manual recommends clean water; keep the intake clear and do not use the pump for sewage or flammable or corrosive liquids.
• Flexible discharge connections: Hose adapters and a check valve provide connection options and help reduce backflow. A 16.4 ft power cord and 26 ft nylon rope aid positioning and retrieval. Choose a compatible discharge hose and use the rope, not the cord, to lift the pump.

Free shipping on orders $50+. 30-day hassle-free returns.