4PCS Pre-Soldered GY-521 MPU-6050 MPU6050 Module 3 Axis Accelerometer Gyroscope Module 6 DOF 6-axis Accelerometer Gyroscope Sensor for Raspberry Pi Pico and Other Models

Key features

• Pre-solder: Solderless! Pins are already attached. Ready to plug in and go.
• GY-521 MPU-6050 module: Communication mode: standard IIC communication protocol; The accelerometer can be operated at both 3.3V and 5V; Compatible with Raspberry Pi
• The MPU-6050 Parameter: Gyroscopes range: +/- 250 500 1000 2000 degree/sec; Acceleration range: ±2 ±4 ±8 ±16g; Transmission can pass I2C up to 400kHz or SPI up to 20MHz
• Chip built-in: with three 16-bit analog-to-digital converters (ADCs) for digitizing the gyroscope outputs and another three ones for digitizing the accelerometer outputs
• Universal usable: the sensor can be applied to develop various entertaining applications and systems; Nice for projects with gaming and virtual reality devices, navigation (for drones and RC planes) and DIY robots

Features:1.The item is set MPU-6050 module 3 axis gyroscope accelerometer module compatible with Raspberry Pi etc.2.The MPU-6050 module adopts the standard IIC communication for communication and is powered by 3V-5V for sustainable use.3.The module is nice for experimental and model structures compatible with Raspberry Pi.4.Even better, this product is ready to be plugged in since it already has soldered pins.Specification:Model: GY-521Model: GY-521Main Chip: MPU-6050Main Chip: MPU-6050Power supply: 3~5VPower supply: 3~5VPin pitch : 2.54 mmPin pitch : 2.54 mmMaterial: PCBMaterial: PCBSize: as the pictures shownSize: as the pictures shownGyroscope range: ± 250 500 1000 2000 ° / sGyroscope range: ± 250 500 1000 2000 ° / sAcceleration range: ± 2 ± 4 ± 8 ± 16 gAcceleration range: ± 2 ± 4 ± 8 ± 16 gCommunication mode: standard IIC communication protocolCommunication mode: standard IIC communication protocolChip built-in 16bit converter, 16bit data outputChip built-in 16bit converter, 16bit data outputPins:VCC: This pin is used for Supply Voltage. Its input voltage is +3 to +5V.VCC: This pin is used for Supply Voltage. Its input voltage is +3 to +5V.GND: This pin is used for ground.GND:

Free shipping on orders $50+. 30-day hassle-free returns.