5pcs Pre-Soldered GY-521 MPU-6050 MPU6050 3 Axis Accelerometer Gyroscope Module 6 DOF 6-Axis Accelerometer Gyroscope Sensor Module 16 Bit AD Converter Data Output IIC I2C

5pcs Pre-Soldered GY-521 MPU-6050 MPU6050 3 Axis Accelerometer Gyroscope Module 6 DOF 6-Axis Accelerometer Gyroscope Sensor Module 16 Bit AD Converter Data Output IIC I2C

$30.99
Sale price  $30.99 Regular price  $41.99
Skip to product information
5pcs Pre-Soldered GY-521 MPU-6050 MPU6050 3 Axis Accelerometer Gyroscope Module 6 DOF 6-Axis Accelerometer Gyroscope Sensor Module 16 Bit AD Converter Data Output IIC I2C

5pcs Pre-Soldered GY-521 MPU-6050 MPU6050 3 Axis Accelerometer Gyroscope Module 6 DOF 6-Axis Accelerometer Gyroscope Sensor Module 16 Bit AD Converter Data Output IIC I2C

$30.99
Sale price  $30.99 Regular price  $41.99
FREE shipping on orders $50+· add $19.01 moreShips from West Long Branch, NJ. Typically arrives in 3–7 business days.
30-day returnsChanged your mind? Send it back within 30 days. Return policy
Secure checkoutQuestions? Call 1-888-460-3822 · Mon–Fri 9–5 ET

Key features

  • MPU-6050 MPU6050 Module: adopts the standard IIC communication for communication and is powered by 3V-5V for sustainable use.
  • 3 Axis Accelerometer Gyroscope Module: Gyroscope range: ± 250 500 1000 2000 ° / s; Acceleration range: ± 2 ± 4 ± 8 ± 16 g; Transmission can pass I2C up to 400kHz or SPI up to 20MHz.
  • MPU 6050 Chip built-in: with three 16-bit analog-to-digital converters (ADCs) for digitizing the gyroscope outputs and another three ones for digitizing the accelerometer outputs.
  • Universally Compatible: This sensor is easy to use with just about any microcontroller that has an I2C interface, for Raspberry Pi and ESP32 models.
  • What You Will Get: 5pcs Pre-Soldered GY-521 mpu-6050 mpu6050 3 axis accelerometer sensor. Ready to plug in and go.

Specification: Model: GY-521 Main Chip: MPU-6050 Power supply: 3~5V Gyroscope range: ± 250 500 1000 2000 ° / s Acceleration range: ± 2 ± 4 ± 8 ± 16 g Communication mode: standard IIC communication protocol Chip built-in 16bit converter, 16bit data output Pin pitch : 2.54 mm Material: PCB Size: as the pictures shown Pins: VCC: This pin is used for Supply Voltage. Its input voltage is +3 to +5V. GND: This pin is used for ground. SCL: This pin is used for clock pulse for I2C communication. SDA: This pin is used for transferring data through I2C communication. Auxiliary Serial Data (XDA): It can be used for other interfaced other I2C modules with MPU6050. Auxiliary Serial Clock (XCL): It can also be used for other interfaced other I2C modules with MPU6050. ADO: If more than one MPU6050 is used for a single MCU, then this pin can be used to vary the address. Interrupt (INT): This pin is used to indicate that data is available for MCU to read. Features: 1.The item is set MPU-6050 module 3 axis gyroscope accelerometer module compatible with Raspberry Pi etc. 2.The MPU-6050 module adopts the standard IIC communication for communication and is powered by 3V-5V for su

Free shipping on orders $50+. 30-day hassle-free returns.