ELEGOO Nano V3 Boards with Mini-B USB Cables, ATmega328P, CH340, 3-Pack

Key features

• THREE PRESOLDERED BOARDS AND THREE MINI-B USB CABLES - Start several compact builds without soldering header pins first, keep one board on the breadboard and embed others in robots, sensor nodes, LED controllers or classroom projects while the included cables support power and programming
• ATMEGA328P PERFORMANCE IN A BREADBOARD-FRIENDLY FORMAT - Run familiar 5 V, 16 MHz AVR sketches with 32 KB flash, 2 KB SRAM and 1 KB EEPROM, plus 14 digital I/O pins, 6 PWM outputs and 8 analog inputs for switches, displays, motors, sensors and data logging
• CH340 USB INTERFACE WITH PRACTICAL SETUP GUIDANCE - Install the CH340 driver if no serial port appears, select Nano and the correct COM port in the IDE, then upload a Blink test; if synchronization fails, check the cable and try the ATmega328P Old Bootloader option when required
• CONNECT UART, I2C AND SPI DEVICES IN SMALL PROJECTS - Use RX/TX for serial modules, A4/A5 for I2C and the SPI pins for displays, storage and sensors, while the 18 × 45 mm footprint preserves breadboard space for jumper wires and surrounding components
• POWER AND MODEL EXPECTATIONS - Supply power through Mini-B USB, 7-12 V VIN or a regulated 5 V input and disconnect power before rewiring; this classic Nano V3-style board has no USB-C, Wi-Fi, Bluetooth, battery charger or features from Nano Every, Nano 33, Nano ESP32 or Nano R4

Free shipping included. 30-day hassle-free returns.