Generator Controller 501K Manual Key Start 501K for Engine Control Module

Generator Controller 501K Manual Key Start 501K for Engine Control Module

Key features

• The Model Genset controller 501K is a Manual Engine Control Module, which has been designed to manually control the engine via a key switch on t front panel.
• The Genset controller 501K is used to start and stop the engine, indicating fault conditions; automatically shutting down the engine and indicating the engine failure by LED giving true first up fault annunciation.
• Operation of the module CONTROLLER 501K is via a three position key switch mounted on the front panel with STOP(O), RUN(I) and START(II) positions.
• In the 'O' position the DC provide is removed from the module and the run relay and alarm output are de-energised.
• If the switch is turned to the 'I' position the module is powered up and the run relay is energised, activating the engine fuel/ignition system and the protection hold-off timer is initiated. If the switch is moved to the 'II' position and held against the spring return, a positive provide is applied to the relevant output terminal and on to the starter motor.

Free shipping on orders $50+. 30-day hassle-free returns.