LarryB's EASY Starter rebuild kit 89-93 for Dodge Denso

Key features

• Kit contains 2 solenoid contacts, 1pc solenoid plunger, removal wrench, 4pc brushes with screw on Pigtails.
• No Soldering Required
• Denso starters on the DODGE Cummins 1989-1993

Fits Denso style starters on Dodge Cummins 19-19. Super Size Starter solenoid contacts have approximately 90% more contact area than stock. Designed to carry twice the amperage load for easier starting and last years longer. Our Super Contacts Fit perfectly and are for replacement of sticking and clicking stock starter contacts in 19 to Cummins powered Dodge Ram trucks. Is your starter clicking a few times and won't crank? Or worse yet, sticking on? If so it's very likely worn solenoid contacts. These trucks use a Denso starter an is very well built gear reduction starter. Your starter contains two contacts that are usually the only parts in these starters that cause any problems. Usually only one contact gets badly burned but we recommend replacing both contacts and the plunger while you're in there. Denso starters use a very good, long lasting brush material. It is common for these brushes to last 200,000 miles without a problem, although sometimes in trucks used off road, water intrusion can cause early wear. Common symptoms are slow cranking but check your batteries and cables first. Brushes should be replaced when there is less than 2mm clearance between pigtail and brush hold

Free shipping on orders $50+. 30-day hassle-free returns.