Replacement for Gerber Safetemp 97-022 97-014 Shower Valve Cartridge Kit

Key features

• FITS GERBER SAFETEMP: 4-piece pressure balance cartridge kit for original Gerber Safetemp 49-400 and 49-700 series single lever tub and shower valves. Functions as a replacement for the 97-022 stem and bonnet and the 97-014 pressure balance spool, with the 92-294 limit stop and 92-257 body O-ring in the same box, restoring smooth hot and cold control and anti-scald protection.
• STOPS DRIPS, HOT SPIKES: Fixes drips, handle weeping, and temperature creep. A worn cartridge lets water leak past the showerhead or tub spout, weep out around the handle, drift hotter mid shower, and surge when a toilet flushes elsewhere in the house. A fresh kit brings back stable water temperature and smooth handle travel.
• COMPLETE 4-PIECE KIT: Stem and bonnet, spool, limit stop, body O-ring included. Each piece functions as a replacement for its Gerber service part: brass rectangular broach stem and bonnet (97-022), pressure balance spool (97-014) with stainless steel internals, temperature limit stop (92-294), and pre-installed body O-ring (92-257). Corrosion resistant engineered polymer body with EPDM seals. 4.75 inch (121mm) overall, 3.75 inch (97mm) body height, 1.77 inch (44mm) body diameter.
• MATCH YOUR OLD PART: White multi-piece stack, separate spool below the stem. The original service parts in a Safetemp valve come out in pieces: a ribbed white bonnet with a brass stem on top, a white pressure balance spool below it, and a small splined limit stop dial riding on the stem. If yours came apart the same way and the stack measures about 4.75 inches from stem tip to spool base, this is the kit.
• GERBER PART NUMBERS: Replacement for 97-022, 97-014, 92-294, and 92-257. Also listed as G0097022 and G0097014. Fits 49-730 (IPS), 49-731 (sweat), 49-733 (IPS with stops), and 49-400 series Safetemp valves, and the 49-830 valve for the stem and bonnet only. Compatible with 97-020 loop handle trim and 97-021 lever handle trim, and installs alongside the 92-329 trim cap, 92-330 sleeve, 97-017 escutcheon, and 93-090 plaster guard.
• AFTERMARKET NUMBERS: Everbilt 43284, Kissler 46-7214, Jerich 97501. Also Grainger 45K890 and HD Supply P313765. If your supply counter or maintenance catalog lists one of these numbers for a Safetemp repair, this kit serves the same repair, with the spool, stem and bonnet, limit stop, and body O-ring together in one box instead of four separate line items.
• PROS AND PROPERTY TEAMS: A single SKU fix for landlords, multifamily maintenance teams, hotels, and plumbers servicing buildings full of original Safetemp showers. One kit carries every service piece for a full generation of Gerber 49-400 and 49-700 valves, which cuts truck stock down to one part number. Available to Amazon Business customers for multi-unit and recurring orders.
• 30 MINUTE INSTALL: Basic hand tools, hex key and channel locks, no soldering. Shut off the water and open the handle to bleed pressure, then remove the handle and escutcheon. Unscrew the bonnet nut counterclockwise, pull the old stem and bonnet and the spool below it, grease the O-rings, seat the new spool first, then the stem and bonnet, and thread the bonnet nut in hand-tight. Set the 92-294 limit stop to your maximum hot before turning the water back on, or the handle can travel to full hot.

Free shipping included. 30-day hassle-free returns.