Tsubaki DS40ATL23 Roller Chain Sprocket, Double Strand, Taperlock Design, Hardened Teeth, 1615 Bushing Required, 23 Teeth, #20 ANSI No., 1/2" Pitch

Key features

• Double strand sprocket with two sets of teeth side by side around the circumference for use with double strand chains, which have a higher tensile strength and can support greater loads than single strand chains
• Pitch of 1/2 inch for size 40 chains
• Sprocket bore has tapering grooves for inserting and locking into place a taper bushing that fits the diameter of the shaft
• Type A sprocket with a simple plate, bore, and no protruding hub on either side for applications where mounting space is limited
• Sprocket teeth help prevent slipping and binding to avoid power loss in assemblies

This Tsubaki roller chain sprocket has a 1/2-inch pitch, fits size 40 chains, and is double strand with two sets of teeth side by side around the circumference for use with double strand chains, which have a higher tensile strength and can support greater loads than single strand chains. It is a Type A sprocket with a bore and no protruding hub on either side, and the bore has tapering grooves (TAPER-LOCK) for inserting and locking into place different TAPER-LOCK bushings depending on the diameter of the shaft. The teeth of the sprocket help prevent slipping and binding to avoid power loss in assemblies. It meets International Organization for Standardization (ISO) 9001 for quality assurance. This double strand roller chain sprocket is suitable for use in a broad range of applications involving moderate to heavy loads and ongoing, high-cycle operations, including heavy and commercial vehicle transmission systems, construction and agricultural equipment, conveyors, and factory manufacturing and assembly lines, among others.A roller chain sprocket is a thin wheel with deep, uniformly spaced teeth ringing its circumference. The distance from the peak of one tooth to the next is called

Free shipping included. 30-day hassle-free returns.