uxcell 625-2RS Deep Groove Ball Bearing 5x16x5mm Double Sealed ABEC-3 Bearings 10-Pack
uxcell 625-2RS Deep Groove Ball Bearing 5x16x5mm Double Sealed ABEC-3 Bearings 10-Pack
Key features
- 625-2RS (I.D.=5mm, O.D.=16mm, Thickness=5mm)
- 625rs bearings are sealed on BOTH SIDES to keep lubricant in
- Chromium Steel long-life bearings, smooth and low noise
- ABEC Tolerance 3 (P6), Z1 Noise Level for most general use
- Static load rating of 670 newtons and dynamic load rating of 1750 newtons
NOTE：Please refer to the picture and select right type of bearings before your order (Sealed or Shield on BOTH or SINGLE side of the bearing). Suffix on the bearing just for differentiating between Sealed and Shield type of bearing. It would not affect the use of our product. Description:Single-row, pre-lubricated, normal accuracy.Deep Groove Ball Bearings are one of the most widely used rolling bearings. They are used to accommodate radial and axial loads in both directions.With small friction and high-limit speed, Ball Bearings are cost-effective and require little maintenance.Chromium Steel (GCr15) made with heat treating, provides high and uniform hardness, good wear resistance, and high contact fatigue performance.Suitable for all kinds of industrial equipment, micro motor, small rotary motor, office equipment and so on. Selecting Guide:Shields (Designation Suffix Z/ZZ) - High speed. Protect from dirt and debris.Sealed (Designation Suffix RS/2RS) - Made of sheet steel reinforced nitrile butadiene rubber (oil- and liquid-resistant). Lower limit speed than Shield Bearings. Specification:Model: 625-2RSSealed Type: Double SealedInner Race/Outer Race Material: Chrome Steel (GCr15)
Free shipping included. 30-day hassle-free returns.
More in Ball Bearings
4901 products · See all Ball Bearings →
2 Pack SBPFL208-24 Pillow Block Bearings 1-1/2" Bore Bearing Units Steel Flange Mounted Bearing Housing Pressed Steel Flange Bearing (SBPFL208)
Timken 9110PP Ball Bearing, Double Sealed, No Snap Ring, Metric, 50 mm ID, 80 mm OD, 16 mm Width, Max RPM, 3600 lbs Static Load Capacity, 5600 lbs Dynamic Load Capacity
6309C3 Timken Deep Groove Ball Bearing 45x100x25mm
Peer 6201-8 ZZ DV2 DEEP Groove Ball Bearing Special BORE ½” 12,7x32x10 mm
Single-Row deep Groove Ball Bearing, Contact Seals on Both Sides (Rubber
Single-Row deep Groove Ball Bearing, Contact Seals on Both Sides (Rubber
SKF 61903-2RS1 Deep Groove Ball Bearing, ABEC 1 Precision, Double Sealed, Standard Cage, Normal Clearance, 17mm Bore, 30mm OD, 7mm Width, 522lbf Static Load Capacity, 9800lbf Dynamic Load Capacity