Valterra 7101 ABS Gate Valve, Black, 1-1/2" Slip

Key features

• APPLICATIONS: Ideal for low pressure and vacuum applications as a quick shut-off for liquids.
• KEY FEATURES: Unrestricted flow - Full port opening - Simple push/pull operation
• SPECIFICATIONS: Maximum Pressure - 30 psi Open/45 psi Closed, Schedule 40 ABS Slip fittings
• REPAIRS: Replaceable body, seals and handle
• SLIP FITTING: Designed to be glued over 1-1/2” ABS pipe

This type of slide gate valve was originally designed for draining tanks and controlling shallow bodies of water like ponds and lagoons. They can also be used as shut off valves in low pressure or vacuum air lines. Please note that each valve size has an open and closed pressure rating. Because the plastic paddle can flex with flowing water they are not good for throttling water or trying to close the valve with fast moving water – thus the low mid flow cut off water pressure of approximately 6 pounds per square inch (psi). These slide valves are sometimes referred to as “knife or guillotine” gate valves and are a great alternative to ball valves in low pressure applications since they are full flow, quick opening, and are generally a much lower cost especially in larger sizes. They work well with soft debris like waste but small hard debris can settle in the bottom of the valve seat/slot and prevent it from closing completely. They can easily be cleaned or repaired by unbolting and replacing the seals or valve body. The handles simply unscrew for easy replacement – if you do so be sure not to damage the valve shaft. Extension rods are available for remote actuation. The Valterra 7

Free shipping included. 30-day hassle-free returns.